Home > News > Content

Automatic Food Bulk Cartoning Machine Packing and Operation Instructions

- Jun 10, 2022-

After the installation of the automatic food bulk cartoning machine is completed, first debug and produce the machine, turn on the power supply, turn on the power switch of the control panel, and the emergency stop switch button to check whether the parameters of the automatic food bulk cartoning machine display screen are normal. Turn on the air source and adjust to 0.6-0.8kg/cm2.

Adjustment of box size: mainly adjust the carton rack, the adjustment of the box chain, adjust the size of the box rack according to the size of the carton and adjust the length, width and height of the box chain

1. Put the carton we want to adjust on the box seat, and then adjust the guides of the box seat to be close to each side of the box. Keep the box steady and don't drop it.

2. Adjust the length of the carton: put the sealed carton on the conveyor belt, and then adjust the handwheel on the right to make the conveyor belt of the cartoner contact the edge of the carton.

3. Adjust the width of the carton: first loosen the two sprocket screws outside the main chain. Then put a cardboard box in the middle of the chain and adjust the width of the chain to the width of the box. Finally, tighten the rear sprocket screw.

4. Adjustment of the height of the carton: Loosen the front and rear fixing screws of the upper guide rail first, and then turn the upper handwheel to make the upper guide rail and the top of the carton in contact with the guide rail. Then tighten the set screw.

5. Adjust the size of the feeding grid: unscrew the fixed bearing screw, put the product in the feeding grid, move the baffle left and right until it is adjusted to the appropriate size, and then tighten the screw. (Note: There are several screw holes on the panel here, be careful not to screw the wrong screws when adjusting the machine).

After the adjustment of each part is completed, you can start to start the jog switch on the control panel, and use the jog operation to perform manual debugging such as box opening, box suction, material feeding, corner folding, and glue spraying. After the debugging of each action is completed, the start button can be turned on, and finally the material can be put on to start the normal production.

Related News

Related Products

  • Automatic Cartoning Packing Machine With Hot Melt Glue Machine
  • Sugar Packaging Machine
  • Stand Pouch Packing Machine Price
  • Powder Packing Machine
  • Liquid Small Sachet Packing Machine
  • Automatic Rotary Bulk Vinegar Packaging Machine