The feed of the automatic cartoning machine is generally divided into three entrances: the manual entrance, the medicine bottle entrance and the machine package box entrance. The whole process from the machine package box feeding to the final packaging molding can be roughly divided into four stages: the carton is fixed by a guide rail and a push plate is used to open the carton. At the same time, there will be two moving forwards from Raise the bottom, jam the side of the carton from the front and back, open the box at a right angle and move it forward to the loading area. After filling in the filling area, the mechanism of the machine will fold the ears into the left and right guide rails, and then perform the closing action. The pre-closing mechanism will first bend the tongue of the box, and then a push plate pushes the lid to bend, so that the tongue is inserted into the box and the lock buckle is fastened. The closing action is a critical action, and the quality of completion has a lot to do with the structure of the carton and the accuracy of the machine adjustment.
The movable shaft of the machine table should be lubricated with a grease gun once a day when commuting to and from get off work. Clean the lubricating oil tank every month. Change the lubricating oil once a year. The lubricating oil is 30# engine oil. Check the gas path frequently. The suction box and the vacuum generator of the suction manual need to clean the filter once a month or two.
Abnormal situation and treatment:
During operation, pay attention to whether the sound of the machine is normal. If there is abnormal noise, stop immediately and report to the workshop security personnel for repair. The paper tray is not opened during operation, and the machine stops automatically. After troubleshooting, the machine needs to be restarted. When the box is missing the manual, the corresponding carton will be rejected at the reject position at the exit of the cartoner. If the manual is missing three times in a row, the machine will stop automatically. After troubleshooting, the machine needs to be restarted. When there is a lack of medicines into the box, the corresponding carton is completely rejected at the reject position at the exit of the cartoning machine. In the event of mechanical overload, the cartoning machine will automatically stop. After turning the machine manually, make a click to remove the unopened carton and restart the machine. Correspondingly several cartons are rejected at the reject position at the exit of the cartoning machine. If there are other unexpected failures, the power supply should be cut off immediately, and the production can be resumed only after the inspection and repair confirm that there is no problem.